This set contains all of the same tools as the KPS Pick Set,
but have Blue Handles as shown above.
This set contains all of the same tools as the KPS Pick Set,
but have Red Handles as shown above.
Government
Elite Series 4 Stainless Steel Set: $500.00
This
set has it all. All of our current bypass tools plus our two types
of serrated tension tools plus our proprietary"Government Steel"
picks in both the standard rubber and as the "Stainless Slender's"
that work so nice is small places.
In short it is our G-3 set plus our new Pro-Dames bypass
set with a smattering of other neat stuff.
There have been so few problems associated with these
picks that we find it easy to extend a limited lifetime warranty on
them: Send any of our broken Government Steel Picks
(G-S) back to Peterson Manufacturing, Inc. with a check for $12.50
and we will happily send you back a new G-S pick, of your choice;
no questions asked, postage pre-paid.
Elite
4 Bypass Pick set:
$340.00
This
is almost the same as the G-4, but not quite.
The case is the same and the tool count is the same,
but the rubber handled picks are made from out high grade spring steel,
not our Government grade Stainless Steel.
A good way to save $160 if you are a little short this
week, but you still get the powerhouse array of tools you need to
do the job right.
Government
Elite Series 3 Stainless Steel Set:
$285.00
The
locksmiths said that Peterson needed a larger full quality pick case,
and it needed to be able to accept the addition of our existing bypass
tools, PLUS it should accept future planned tools. We
listened! So now we have a wonderful tri-fold sheepskin
glove leather case that is just jam packed with over $427 of our quality
tools. The featured picks are made from moly-stainless steel, (which
is the highest tensile strength steel made). We have added our DAMES
(4P-BS) set, an upgraded moly extractor, our slender pick set, and
even our enhanced serrated tension tools to this professionals only
grade pick set. To top it off, there is still space in it for future
tools.
While
this set is not priced for the timid, due to its value and the high
quality tools included plus it's overall capability, it has become
a great seller.
There
have been so few problems associated with these picks that we find
it easy to extend a limited lifetime warranty on them: Send any of
our broken Government Steel Picks (G-S) back to Peterson
Manufacturing, Inc. with a check for $12.50 and we will happily send
you back a new G-S pick, of your choice; no questions asked, postage
pre-paid.
Government
Elite Stainless Steel Set:
$185.00
Our wonderful sheepskin
glove leather case just jam packed with tools. Our featured picks
are moly-stainless, which is the highest tensile strength steel made.
Reports are coming back from users that these rubber handled picks
have an enhanced "feel" due to the tensile strength that
seems to aid in lock picking.
This was our first
Government quality pick set. Contents are valued at over $252.00,
But our price is only $185.00. We are starting to see locksmiths buy
this compact quality set in greater numbers again, but they are teaming
is up with our newly released "Pro-Dames" set found in our
By-Pass Tools" page. Add some serrated tension tools and some
"Just Picks Slender Stainless" and you have the equivalent
of our G-4 pick set in two easy to manage cases.
There have been
so few problems associated with these picks that we find it easy to
extend a limited lifetime warranty on them: Send any of our broken
Government Steel Picks (G-S) back to Peterson Manufacturing,
Inc. with a check for $12.50 and we will happily send you back a new
G-S pick, of your choice; no questions asked, postage pre-paid.
Contents: 1 ICE-1
Scissor Extractor, 2 Wire cut Extractors, our I-Core 3 piece set,
Our Peterson Bending tool and Tension Tool Strips
E2
Pick Set: $120.00
This glove leather
case is only 3 and 1/4 inches wide, and has all 9 Peterson picks plus
two wire cut extractors, 1 Slender gem for Para-Centric locks, and
our trade mark group of U-Bend IT tension blanks with a Peterson bending
tool. Fits perfectly in the shirt pocket, and the leather is so nice!
M-2
Set: $109.00
This
is my preferred set for the new person at work. It has a case that
has plenty of extra room, a nice set of our texture grip handles,
a grouping of our U-Bend It tension tools PLUS OUR WONDERFUL FLAT-5
TENSION TOOLS SET.
This is a set with great potential for the user.
Professional
II Set: 98.00
This
is a very nice bi-fold set combined with our plastic handled picks,
a grouping of U-Bend-it tension tools, and our 3 bent "STT"
tension tools.
A lot of people prefer our plastic handles for the "feel"
they get, and many folks like this simple and supple bi-fold case
-- so here it is!
The
City:
$44.00
Designed
for our friends in NYC who wanted a small - High Quality set for normal
daily use - without over filling pockets.
Contents: 6
Rubber Handled picks, 2 wire cut extractors, and two tension tools.
With quality leather snap over case
City
Lites: $34.00
A smaller version
of the same concept as " The City". On the plus side,
we use our new "Texture Grip" handle coating. This is
for our friends who like a smaller handle like some "other
brands". But we do it with comfort.
On the minus
side? Only 5 picks, 1 Extractor, One Tension Tool. All included
with our Quality Leather snap over case great for general use, or
for beginners.
Contents: 5
Textured Gripped handled picks, 1 Extractor, One tension tool. With
quality leather snap over case.
Just
Picks Stainless Slender Set: Price: $32.00
Brought
to you by special demand! The locksmith demanded more profiles of
our "Slender" picks to add to their arsenal!
These picks
are made in the same format as the "Slender Gem." A thin,
but extremely strong 0.015 pick coated with a dipped on plastic
handle. These picks are wonderful for picking narrow key ways such
as small format I-cores and many other narrow locks
.
Deep
cuts close to the bow of a key help to add security because if they
come to sheer before the pins behind them, thick picks cannot pass through
the barrier created.