By-Pass Tools

DJ-MC-1Mortice Cyl Drill Jig - Special Price $55.00

PRO-DAMES: Bypass Set: $230.00

Almost all of our bypass tools in a luxurious M-2 Case. (does not include the Peterson Slim Jim – it won’t fit!).

This set would make a nice companion for our G-1 (or any other) pick set in that it provides a great arsenal of bypass tools for when the need strikes. In addition to our standard 4-PBS bypass kit contents are included:
Our wafer breaker for defeating the American Padlock security wafer,
The contents of our Adams Rite Deadbolt (swing bolt) tool set
One really nice case! (M-2 Case).

This is a handsome and powerful stand alone bypass set. However with the addition of our Flat-5 serrated tension tools , a “C” type I-core tool and a set of Stainless Slender Picks , any one currently possessing a G-1 Pick Set would be effectively upgraded to our latest configuration G-4 Pick Set.

Adams Rite Deadbolt Tool Set: $120

The Peterson Deadbolt bypass kit overcomes problems encountered using other tools. The five varying wire designs allow egress into key ways as narrow as 0.035, while the memory in the Peterson quality wire allows extended use of the tools.

Named for the short in and out pushing action required to deflect the wires down off the apposing cylinder, these tools plus a little practice can allow entry into a door with an Adams-Rite type hook or deadbolt in as little as 15 seconds!

Peterson’s tool handles provides the leverage you need to control and manipulate the tool, while the selection of five tools insures you that you always have the right tool for the job.

The selection of wires allows the locksmith to fine tune the configuration of the wires to work the way they the locksmiths need them. Learning this valuable lesson about adjustment allows intimate knowledge of these tools, and insures competency in use, and the skill for continued professional success.

IT IS HIGHLY RECOMMENDED THAT THE LOCKSMITH GAINS PRACTICE AND EXPERIENCE WITH THIS FINE SET OF TOOLS PRIOR TO A SERVICE CALL! While they will faithfully perform as advertised, familiarity and practice on a lock and cylinders assembled out of the door is very important, and will lead you to immense satisfaction.

4-PBS Bypass Kit: $72.00

These tools confound normal Defenses Against Methods of Entry.

4 piece bypass kit: 1 knife tool, 1 mini knife, 1 AR trip wire and 1 AD-B Padlock Tool

Adams Rite DL Latch Kit: $34.00

1 trip wire plus a Adams Rite Slim Jim

Use the Trip wire to trip the locking latch feature of the adams rite door hardware Will independently open an adams rite, but use of a Slim Jim or other tool extends the wire life

Adams Rite Slim Jim: $16.00

Adams Rite DL Trip Wire: $43.00

2 trip wires

AD-B American Padlock Bypass Tool: $28.00

This tool is designed to fit down the key way of an American Padlock series 700 and 1100, (plus some clone designs), and open it as easily as with a key! You will find that some of these padlocks have a protective disk that prevents this type of attack, but this will work well on: Older locks, Locks with riveted keepers, and many locks that have been previously serviced or re-keyed. Detailed instructions included.

See our kits below(AD-WBO-2) & (AD-WB3K) that allow you to defeat the protective disk sometimes found in these padlocks.

American Wafer Breaker Kit - 3 pc kit: Price: $72.00

The kit comes with the pair of breaker tools -- plus one bypass tool:
AD-WB3K AMERICAN WAFER BREAKER KIT - 3 pc kit

American 2 Piece Wafer Breaker Only: Price: $52.00

This is the pair of breaker tools only:
AD-WBO-2 AMERICAN 2 PIECE WAFER BREAKER ONLY :

Peterson Mini Knife

Decodes and/or opens multi-wheeled combination locks such as those found in many padlocks and briefcases. Comes with instructions and leather case. High strength steel.

The Mini-Knife also can be used to slip the ratchet and bypass most handcuff locks including pearless type handcuffs. This is possible on single locked cuffs even if they have been retrofitted with another lock system.

Better Steel, Better Handle: Opens many toe, heel, (and some toe & heel) padlocks, & filing cabinet locks. Comes with leather case.

DJ-MC-1Mortice Cyl Drill Jig: Normal Price: $70.00 Special Price: $55.00

OPEN A/R TYPE DEADBOLTS AND LATCHES (including those protected by high security cylinders).
NEED TO OPEN AN ADAMS-RITE SWING-BOLT THAT HAS A HIGH SECURITY LOCK INSTALLED IN IT?
This drill jig serves several functions:
(1) you can drill the set screw out of almost any mortise lock allowing an easy removal of the cylinder with out damaging the door or lock.
(2) In commercial doors using A/R type swing bolts drill a small hole then use our “POKE TOOL” to release the swing arm. It is simple to cover the hole with our washers.
(3) In commercial doors using A/R type latches, use the second hole to drill a differing hole in the door for those lacks, and again use our poke tool to release the double locking feature of the lock, then slip the latch.

This drill jig works on doors with or without protective escutcheons. And you know the set screw is not protected on even the best high security locks!

COMES WITH 1 PUSH TOOL, 4 ASSORTED WASHERS AND A #12 DRILL HSS

Spare Washers 6 Pieces: $22.00
3 Small and 3 Large

A Replacement set of 6 washers for your mortise cylinder drill jig.

Spare Push Tools 2 Pieces: $12.00

Replacement push tools for your mortise cylinder drill jig. These push tools work best when sharp. Here is a set of two with new factory edges --for when yours are worn out or lost.

Flexible Shim: $7.00

Here is a unique tool. It is not unique with for what it is, but instead the material is unique. Instead of a brittle plastic, this tool is a six-inch square made of plastic impregnated fabric. We believe the increased flexibility of this material will provide a strong but more flexible solution to your latch bypass activities.

View Cart | Top