Peterson Manufacturing: Automotive Tools

This tool makes quick work of removing the ring clip on older GM/Chrysler/Jeep steering columns. Instead of juggling an ice pick and a small screwdriver and spending 5 minutes or longer struggling to remove the ring clip, this tool makes clip removal a matter of a few seconds. Place the tool in the shaft spline and underneath the ring clip and pull back to quickly lift the clip out of its seat.

We have now upgraded this tool to "Government Steel" to make a great tool better.

We at Peterson have taken the task of broken key extraction very seriously. Because of our designs, the use of better steel and production techniques, the ease of use and the gripping power of our extractors combine to exceed anything else available.

The task of removing automotive keys has been greatly changed by the addition of Peterson's (Patent Pending) extraction pliers. These hard biting, heavy pulling tools are currently available in the following three configurations which allow for the various key milling profile.

Some locksmiths prefer to bend the tips of these pliers so that they are apposed, some prefer them "as is". Your choice if you wish to bend them.

We group these two kit selections into sets of either three pieces or six pieces packaged in a tube. All are designed to provide the length and strength required for the task at hand. Our patent pending saw profile makes key extraction as easy as "insert, lift, wiggle forward, press down, pull!

Six high quality extractors that will make life easier for you. Packaged in a tube at a low price.

A try-out set of three high quality extractors that will make life easier for you. Packaged in a tube at a low price!

Named for the sideways movement of the bent finger, this tool is inserted along side the key blade of the broken key. The tapered nose of the 0.004 thick shims lift the lock's pins or wafers up out of the way allowing the bent finger to enter the key cut. With the pins lifted up and the finger woven into the key cut there is nothing left to do but pull the key out!

Sidewinder Extractor Kit Series 2 (NEW): $42.00

PETERSON JIGGLER PICKS

We redesigned the way you use a Jiggler pick; it needs to be short just about the length of a real "worn key". Short picks riveted together: a nice size to put in a pick set. The GM type is our first of many to come.

GMC Jiggler picks for 6 pin sidebar lock - GM-J: $70.00

Having these key shapes in a short version pivoting on a screw type rivet greatly improves your "Jiggle" action

Chrysler-Plymouth-Dodge Jiggler picks: $40.00

Ford 5 Pin Jiggler Pick: $40.00

Jiggler Picks for 5 Pin ford Locks

Ford 8Pin Jiggler Pick: $40.00

Jiggler Picks for 8 and 10 Pin Ford Locks

Oriental Jiggler Pick: $38.00

Jiggler Picks for Oriental and European cars. Includes single pick profiles and one of our famous saw tooth extractor profiles. Also can be used to pick other locks.

Auto Shutter Tool Set, Price: $23.00

These tools that hold open the dust covers of automotive locks were designed by automotive locksmiths, for the automotive locksmiths! These three quality tools have the following outstanding features:

Color coded thick dipped handles not only protect your customers automobile, but the extra weight stabilizes the tool, and very importantly, the bold colors allow you to quickly reach for the tool you need.

Double notching allows usage of these tools in normal lock situations, while not ignoring your tool positioning needs with the deeper seated locks.

What a perfect complement to the Peterson Wafer Readers! (Shown below) We are sure you will thoroughly enjoy this set of Automotive Dust Shutter tools, the finest ever made!

5 Piece Wafer Lock Reader: $55.00

Always wondered about reading wafer locks? Well, here is a set of readers of all the sizes you could ever want. Not only is the two page long instruction sheet included to help start you on your way, but you also get one of the handy "must have" Wafer Doc Repair Tools.

Wafer Lock Repair Tool: $17.00

This picture does not do this incredibly useful tool justice! This tool has a sharp pointed end (LH) for prying bent or incrusted wafers back down, and a pulling probe to straighten out bent wafers. A pretty darn useful tool! Make sure you read the customer comments at the very bottom of this page: you might want an extra tool or two!!

Brockhage Small Air Wedge: $35.00

Rough & Tough car door air wedges - "Tougher than others"
Approximately 6" x 6"

Air Wedge Pump: $13.00

Replaces your broken or leaking air wedge hand pump.

View Cart | Top